E-ABS, Easy-ABS Filament 1KG
GARANTIERT SICHERER CHECKOUT
Couldn't load pickup availability
💭Invite a friend to experience the incredible quality of SUNLU products! Share the joy of innovation and creativity with those who matter to you most.
What is SUNLU Easy ABS?
We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix.
While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance.
The result is a minimum printing temperature of 225°C and a minimum heating of 70°C for the base plate.
But E-ABS still maintains the low stress it should have: no cracking, no warping!
Description:
1. Printing does not need a holding tank, open printer can be used!
2. Low shrinkage, print models do not warp or crack!
(Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.)
3. Very low odor when printing
4. Filament do not need to dry, very little impact by humidity
5. balanced physical properties, high strength, good toughness
Parameter:
Material: SUNLU E-ABS(Easy-ABS)
Wire diameter: 1.75/3.0MM
Tolerance: ± 0.02MM
Printing temperature: 225-235 ℃
Base plate temperature: 60-70℃
Melt index: 98g/10`min
220℃/10kg(g/10min)
Elongation at break:20%
Melting point ℃: 130
Heat distortion temperature ℃: 57.9
Density g/cm3: 1.04
Printing speed: 40-60mm/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll; 0.9KG/Roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=395M
3.0MM(1KG)=130M
FAQS
Looking for more infomations
We provide 14 DAYS REFUND & RETURND
If there are any order shipping or other issues, please email after-sales service at sunluuk@sunlu.com
If there are any product quality issues, please email tech-service at support@sunlu.com
Click here for more information(Return Policy)
For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).
You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.
PLA is the most commonly used 3D printing material, it is economically and begainner-friendly with rich colors.
PLA Meta is an upgraded version of PLA, with lower printing temperature, better toughness and softer colors.
PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware
The printing quality will be affected if the PLA is moistured. Please pay attention to moisture-proof of the filament, or use a drying box to dry the filament
To store PLA filament and PLA+ filament, it is recommended to keep them in a dry and cool place, away from direct sunlight and moisture.
Clean the nozzle, try turning the printing temperature up.
Check the distance between the nozzle and the hot bed, try to increase the printing temperature or the hot bed temperature
PLA and PLA+ filaments are recyclable.
PLA and PLA+ filaments can be used on most FDM 3D printers, as long as the printer's hotend temperature can reach the recommended temperature for the filament
Subscribe to our newsletter, you can get a 10% discount for your first order, and at the same time, you can receive the latest promotion information and new product release information of Sunlu